Do you want to add a photo to your quilt that looked a lot more like portion of the fabric than an iron-on decal?
Before, we trusted photo transfer paper to iron our photo onto our quilt block. Have you heard about direct-to-garment printing? It’s an excellent new way to get your favorite photo away from your scrapbook and on your quilt block.
Direct-to-garment (DTG) printing is a kind of digital printing. Having a cost of about $20,000, it’s not practical to operate out and purchase your very own DTG printer. The standard price for coffee printer is $8 to $10.
This process is a touch more pricey compared to traditional photo transfer method. That’s partially since the technology is indeed new. If you choose to try a DTG photo on your memory quilt block, there are some factors to consider in selecting the printer that will perform work for you:
1. Make sure you will find no chemicals required to pre-treat your fabric first. Some DTG printers create a graphic that is certainly similar to screen printing. You don’t want that look or feel in your quilt. The ink will be hard along with the fabric and can eventually (sometimes much sooner than later) are going to crack and wear with washings. Ask your prospective printer to discover a sample of something they’ve printed. If you can experience the ink is raised higher than the surface at all in any way, it’s probably a sublimation type process which requires chemicals to pre-treat the material.
2. Use a type of digital DTG printing made available from the Brother GT 541. There are actually no chemicals found it necessary to pre-treat the fabric. The inks bond using the natural fibers and therefore are heat cured to put the image. The inks are water based, that helps leave a soft yet crisp image on your fabric.
There are a few downfalls to using a4 uv printer in your quilt blocks. One pitfall is color limitations. Since DTG printing is actually a form a digital printing, there is absolutely no white ink. White is the lack of color. Which means that you are unable to print a picture on dark blue or black fabric.
Digital garment or fabric printing is a CMYK format – cyan, magenta, yellow, and black. It is possible to mix those colors to obtain a full spectrum of accurate colors – hardly white. There are actually DTG printers that print white ink, but a majority of of the require chemical pre-therapy for the fabric and will leave you with that thick surface print.
You must work with a light colored or neutral fabric and it should be cotton or even a cotton blend. The fabric must have the capacity to withstand 350 degrees for approximately thirty seconds. In case you are not 09dexypky with one hundred percent cotton or a 50/50 blend, ask your printer when the fabric works.
Dimensions of your print could be a limitation. Most DTG printers possess a printing field around 14 inches x 16 inches. For the majority of quilters, that size range won’t be a problem.
And speaking of printing fields, here’s a hint. Most direct to t-shirt printer charge to get a 14×16 surface. Should your blocks will permit 2 or 3 photos to match within that range, you can get them all printed for the price of one. Talk with the printer to find out if it’s possible together with your particular project.
Similar to most technological advances, the buying price of digital garment (or fabric) printing will most likely decrease over time. Maybe it can be located on smaller printers for home and private use. Until then, see if you can locate a DTG printer for your next photo quilt project. The outcomes will look like custom fabric, that will be a great touch for the unique quilt!